ADI Phaser Dashboard

ADI Phaser Desktop

Settings

Calibration

Signal Freq (GHz)

Signal BW (MHz)

Rx Gain (dB)

Tx Gain (dB)

Tx Mode

Connection

Simulator Mode

Backend URL

Window Presets

Aperture Presets

Enforce Symmetric Taper

Mode

Steer Angle (deg)

Taper

Signal vs Time: the beam is held at the Steer Angle, which takes effect as you move it. Apply sets the Taper and zeroes Phase Control.

Steer Resolution (deg)

Phase Shift Bits

Use Bits (ignore Steer Res)

Mode Manual MVDR

Beam 0 Gain

Beam 0 Phase

Beam 1 Gain

Beam 1 Phase

Snapshots (K)

Diagonal Load

Uses the Steer Angle from Beam Steering as the desired look direction.

Computed, not radiated: a second source at the angle below is added to the received signal, as the array would see it, before the digital beamformer.

Angle (deg)

Power (dBFS)

Offset from target (kHz)

Coherent with target

Phase (deg, sim only)

Show Peak Gain Marker Show Peak Angle Marker Show Beam Squint Info Show HB100 Show Interferer Show Logs Tab Show Monopulse Delta Beam Show Monopulse Error Function

X Min:

X Max:

Y Min:

Y Max:

Show sector bands on plot

ADI Phaser

Interferer

Runtime Logs

Peak Gain -- dB

Interferer vs Target -- dB

MVDR Suppression -- dB

CTF Sequence — / —

Calc (GHz) --

Meas (GHz) --

Disconnected

Calibration

Initializing...